Giant permittivity and low dielectric loss of Fe doped BaTiO3 ceramics: Experimental and first-principles calculations

Fe doped BaTiO₃ ceramics with giant permittivity and low dielectric loss were synthesized in N₂/H₂ atmosphere started with BaTiO₃ powders and iron powders. XRD analysis exhibited the tetragonal-pseudocubic phase transition when the Fe content is 3 mol%. XPS spectra confirmed the iron oxides with mixed-valence structure of Fe²⁺/Fe³⁺, while Ti-ions maintain Ti⁴⁺3d⁰ states without any oxidization-reduction. For the case of ceramics with 5 mol% Fe, the dielectric constant was 66,650 at 1000 Hz at room temperature, 19 times higher than that of pure BaTiO₃ ceramics, while the dielectric loss tangent was 0.13. Comparison with other giant-permittivity materials demonstrated the superior potential of present ceramics. First-principles calculations investigated the interfacial interaction of Fe-[TiO₂] interface and Fe-[BaO] interface. Giant dielectric constant was induced by the interfacial polarization between insulating ferroelectrics and semiconducting iron oxides with mixed-valence states, as well as the contribution from the generated electron hopping conduction.     

Preparation of YSZ porous ceramics with precise porosity control

Conventional preparation of porous ceramics often hard to accurately control the porosity of the samples. In this paper, by improving the foaming method, the foaming process is placed in the limited space of the ball mill tank, and YSZ porous ceramics with different porosity are obtained by changing the amount of slurry. Initial results showed that the porosity of the sample varies linearly with the increasing of addition of slurry. From the microscopic morphology, it can be seen that the increase in slurry content will reduce the number of pore with little changed size, which lead to the decrease in porosity. Therefore, with simple calculation YSZ porous ceramics with 85%, 80%, 75%, 70%, and 65% porosity can be obtained using the method of foaming in limited space by ball milling.     

Image and Feature Space Based Domain Adaptation for Vehicle Detection

The application of deep learning in the field of object detection has experienced much progress. However, due to the domain shift problem, applying an off-the-shelf detector to another domain leads to a significant performance drop. A large number of ground truth labels are required when using another domain to train models, demanding a large amount of human and financial resources. In order to avoid excessive resource requirements and performance drop caused by domain shift, this paper proposes a new domain adaptive approach to cross-domain vehicle detection. Our approach improves the cross-domain vehicle detection model from image space and feature space. We employ objectives of the generative adversarial network and cycle consistency loss for image style transfer in image space. For feature space, we align feature distributions between the source domain and the target domain to improve the detection accuracy. Experiments are carried out using the method with two different datasets, proving that this technique effectively improves the accuracy of vehicle detection in the target domain.     

山东省沂源县中低温热液型多金属矿成矿模式探讨——以沂源县菜园村铜多金属矿点为例

中生代以来，鲁中地区构造岩浆活动强烈，岩浆侵入活动影响广泛，这一时期是鲁中地区Au、Ag、Cu、Fe等内生金属矿产的主要成矿期，山东省沂源县恰处于鲁中地区煤 Fe Al Au Pb、Zn 稀土、建材、非金属Ⅳ级成矿亚带上。为查明该区域的成矿地质条件，提高区域矿产地质调查程度和研究水平，调查与成矿有关的地质体、构造、矿化蚀变带的空间分布及其特征，在该区开展了1∶5万区域矿产地质调查工作，通过1∶5万专项地质填图、物化探测量、探槽等工作，新发现了一批中低温热液型多金属矿点，并建立了该区域中低温热液型多金属矿的成矿模式。     

热处理工艺对30MnCrNiMo高强钢组织与性能的影响

借助全自动淬火膨胀仪测定钢的Ac₁、Ac₃相变点,通过对试验钢进行淬火+亚温淬火+回火热处理和淬火+回火热处理,研究了两种热处理工艺下30MnCrNiMo高强钢的组织与性能。结果表明:30MnCrNiMo高强钢的Ac₁、Ac₃相变点分别为653、807 ℃。采用淬火+亚温淬火+回火的热处理工艺所获得的马氏体和铁素体复相组织比直接淬火+回火得到的全马氏体组织更为细小、均匀,试验钢的屈服强度为1499 MPa,伸长率为14.0%,室温、-40 ℃冲击吸收能量分别为35.5和29.5 J,钢的塑性和冲击性能显著提升,有效改善了30MnCrNiMo高强钢的强韧性能。     

刀尖圆弧半径补偿对球面零件车削加工影响的分析

采用刀尖圆弧半径为0.4 mm的刀片,以0、0.4 mm、0.8 mm、1.2 mm为刀尖圆弧半径补偿值,得到球面曲率半径不同的四个试件,基于三丰C-3200测量仪对球面轮廓度进行测量,分析刀尖圆弧半径补偿对球面零件车削加工的影响。分析结果表明,在进行凸球面零件加工时,HNC-818A数控系统中的刀尖圆弧半径补偿功能有效,球面的曲率半径与刀尖圆弧半径补偿值的单调性一致。当刀尖圆弧半径补偿值线性变化时,球面的曲率半径呈非线性变化。当设定刀尖圆弧半径为真实值时,球面轮廓最为理想。在球面零件加工实践中,使用刀尖圆弧半径补偿功能,精加工采用可转位机夹车刀,通过试切法合理修改刀尖圆弧半径补偿值,可以提高球面零件的车削加工质量。     

基于声音信号的摄像头控制

小型智能视频监控系统,可以通过声音传感器采集到的声音信号来感知监控区域的变化,驱动摄像头水平方向的左转右转,从而进行自主监控。此次设计用到的核心硬件是研华公司生产的PCI-1718HDU多功能数据采集卡,用到的软件平台是Visual C++6.0,区别于单片机控制,采用采集卡控制的优点就是能将视频信号和控制界面整合在一起,能让用户更加直观、方便地对摄像头进行各种控制。同时此款系统采用的传感器是声音传感器,其输出是随信号强弱而变化的电压信号,配合功能强大的数据采集卡能派生出许多额外的强大功能。     

“内部工程社会学”与“外部工程社会学”——建构工程社会学体系的一种尝试

目前工程社会学在我国正逐渐兴起,出现了"工程共同体论"、"社会评价论"和"建设工程系统论"三种不同研究范式,各学者对系统的工程社会学体系莫衷一是。本文首先批判性梳理了上述三种范式,指出其对于工程社会学建构的作用和意义;其次,借鉴英国科学社会学家约翰·齐曼对科学社会学知识的类型划分,将工程社会学体系划分为"内部工程社会学"和"外部工程社会学",并提出"工程域"和"工程社区"两个概念,它们是工程社会学的基本范畴,也分别是内部工程社会学和外部工程社会学的核心概念;最后,展望工程社会学发展前景,指出工程社会学必将成为社会学"学术大家庭"中的重要一员。